Wireless BlueTooth Portable Pulse Oximeter MSLPO-B

Wireless BlueTooth Portable Pulse Oximeter MSLPO-B

Parameters

：

Three Parameters

：

SPO2

、

TEMP

 and

Pulse Rate

Waveforms

：

Waveform: SPO2 waveform-PLETH

Features

：

• Monitoring SPO2, TEMP, PR & PLETH
• 2.8 inch color TFT LCD in real time display, displayable in big font and big screen
• BlueTooth wireless is very convenient to realize reviewing the measurements in big screen via connecting PC and to upload history data to PC for review, printing or storage 
• Unique software for telemonitoring by transmitting data synchronously via internet  
• Long time monitoring and sleeping monitoring
• Storage/Review trend data up to 3888 groups, data save time interval settable
• Audio and visual alarm when parameters exceeded and sensor-off
• Built-in rechargeable Li-ion battery, up to 15-hour running time
• Battery capacity indicator. Automatic shutdown for power saving

Wireless BlueTooth Portable Pulse Oximeter MSLPO-B 

Applications

：

T

he

 oximeter could be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

Wireless BlueTooth Portable Pulse Oximeter MSLPO-B

Specifications:

1. General

Monitoring Parameters: SpO2

、

PR

、

PLETH

、

Pulse strength

、

TEMP

Signal sockets

：

SpO2 socket

、

TEMP socket

、

USB socket(for charge battery and transmit data)

2. Display screen    

Type:

240

×

 320

dot matrix

 color

TFT LCD

 screen

Display area: 4

3

mm×

58

mm

3. Functions

PL

ETH: The monitor can display PLETH waveform

Intelligent parameter monitoring screen: The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor.

Audio and visual alarm: The speaker sounds the alarm and the parameter’s measurement will become in red to flash on the screen. Also the same when sensor-off.

Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.

Power saving: The monitor will automatic shut down to save power. The time is settable.

Trend: Storage/Review trend data up to 3888 groups, data save time being set freely

Data storage: The saved data will never be lost even if the monitor is powered off.

Communication: Transmitting the patient’s trend to a PC for display, observation, saving and printing

 via USB or Bluetooth wireless

4. Electrical specifications

Working Voltage: D.C.

3.7V/3000mAH

AC power adaptor

Input:

AC 100 V

～

240V, 50/60Hz, 5VA

Output:

D.C. 5V

Internal battery

Type: D.C.

3.7V/3000mAH

 Li-ion rechargeable battery

Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25℃)

Recharge time: 8 hours

5. Environment

Temperature

Operation: 0

°

C ~ 45

°

C   

Transportation and storage: -20

°

C ~ 60

°

C

Humidity

Operation: 15% – 95 %( noncondensing)   

Transportation and storage: 10% – 95 % (noncondensing)   

Altitude

Operation: 86 KPa ~106 KPa

Transportation and storage: 50KPa~106 KPa

6. Parameter Specifications

SpO2

Patient: Adult,

pediatric,neonate

Range: 0% – 100%

Resolution: 1 %

Accuracy: 70% – 99%:

±

2 %

 

0% – 69%: Unspecified

PR

Range: 0 bpm ~250bpm

Resolution: 1bpm

Accuracy:

±

2bpm

TEMP

Channel: 1

Input: Body surface thermal-sensitive resistor temperature sensor    

Range: 0℃

～

50℃

Resolution: 0.1℃

Accuracy:

±

0.2℃